Ensure optimal engine protection and seamless performance for your Toyota with the ‌AY100TY021 Oil Filter‌. Designed as a direct replacement for the OEM 90915-30003, this high-efficiency filter delivers ‌VK-certified OEM compatibility‌, superior contaminant removal, and extended service intervals. Perfect for DIY enthusiasts and professional mechanics, it safeguards engines from wear, sludge buildup, and oil degradation in sedans, SUVs, and hybrids.

Key Features of AY100TY021 Oil Filter‌

Advanced Filtration Technology‌

Synthetic Media‌: Captures 99% of contaminants as small as ‌20 microns‌ (dust, metal particles, carbon deposits).
Anti-Drainback Valve‌: Prevents dry starts by retaining oil in the filter when the engine is off.
High-Pressure Relief Valve‌: Maintains consistent oil flow (up to ‌300 kPa‌) during cold starts or heavy loads.

OEM Precision Fitment‌

Direct replacement for ‌Toyota 90915-30003‌, ‌VK part number 04152-31020‌, and cross-compatible with:
Toyota Camry‌ (2018–2024) 2.5L/3.5L engines.
RAV4 Hybrid‌ (2020–2024) A25A-FXS engine.
Corolla‌ (2019–2024) 1.8L/2.0L engines.
Highlander‌ (2017–2024) 3.5L V6.

Durable Construction‌

Steel Casing‌: Resists corrosion from moisture and acidic oil additives.
Nitrile Gasket‌: Ensures a leak-proof seal even under extreme temperatures (-30°F to 400°F).

Extended Service Life‌

Rated for ‌7,500–10,000 miles‌ or ‌12 months‌, whichever comes first.
Symptoms of a Failing Oil Filter‌

Replace your oil filter immediately if you notice:

Low Oil Pressure Warning Light‌: Restricted flow due to clogged media.
Engine Knocking/Ticking‌: Inadequate lubrication from contaminated oil.
Dark, Gritty Oil‌: Visible metal particles or sludge during oil changes.
Oil Leaks‌: Damaged gasket or cracked housing.
Installation Guide‌
Drain the Old Oil‌:
Warm up the engine for 5 minutes to improve oil flow.
Place a drain pan beneath the oil plug and remove it with a 14mm socket.
Remove the Old Filter‌:
Use an oil filter wrench (64mm/14-flute) to loosen the filter.
Clean the filter mounting surface with a rag.
Install the AY100TY021‌:
Apply a thin layer of fresh oil to the new gasket.
Hand-tighten the filter until snug, then add ‌½ turn‌ (do not over-tighten).
Refill Oil‌:
Pour recommended oil (e.g., 0W-20 synthetic) and check for leaks.
Reset the oil maintenance light via the dashboard menu.
Why Choose AY100TY021 Over Aftermarket Filters?‌
VK OEM Certification‌: Meets Toyota’s strict engineering standards for fit, flow rate, and filtration.
Enhanced Engine Longevity‌: Reduces wear on crankshafts, camshafts, and turbochargers.
Cost-Effective‌: Priced 20–30% lower than dealership parts without compromising quality.
Warranty Compliance‌: Maintains factory warranty coverage when used with approved oils.

Conclusion‌
The ‌AY100TY021 Oil Filter‌ is a reliable, cost-efficient solution for Toyota owners seeking OEM-grade performance without dealership markup. By trapping harmful contaminants and maintaining stable oil pressure, it ensures your engine runs smoothly and efficiently for years. Always pair it with high-quality synthetic oil and adhere to scheduled maintenance intervals. Confirm compatibility using your VIN or consult a trusted Toyota technician.

Keywords‌: AY100TY021 Oil Filter Replacement, Toyota 90915-30003 Alternative, VK OEM Oil Filter, Camry Oil Change Kit, RAV4 Hybrid Oil Filter, Corolla 1.8L Filter Upgrade.

SEO-optimized for Toyota owners, auto repair shops, and parts retailers. For bulk pricing or technical inquiries, contact authorized VK suppliers.