Upgrade your vehicle’s engine protection with the ‌15201-Z9011 oil filter‌, the improved direct replacement for the discontinued ‌15201-Z9001‌. This SEO-optimized guide covers fitment, performance advantages, installation steps, and trusted suppliers for Honda, Acura, and compatible models.

Part Overview & Key Features‌
Why Replace 15201-Z9001 with 15201-Z9011?‌
Discontinued Legacy Part‌: Honda phased out ‌15201-Z9001‌ in favor of the upgraded ‌15201-Z9011‌.
Enhanced Filtration‌: 25% larger filter media area for better contaminant capture (98% efficiency at 25 microns).
Anti-Drainback Valve‌: Improved silicone design prevents dry starts and oil starvation.
Durability‌: Steel base plate and threaded insert resist deformation under high pressure.
Compatibility‌: Direct bolt-on replacement without modifications.
Key Specifications‌:
Part Numbers‌:
15201-Z9011‌ (current OEM)
15201-Z9001‌ (legacy, discontinued)
Thread Size‌: 3/4"-16 UNF
Bypass Valve Pressure‌: 8–12 PSI
Height‌: 2.68 inches
Diameter‌: 2.95 inches
Compatible Vehicles‌
Vehicle‌ ‌Year Range‌ ‌Engine‌ ‌Notes‌
Honda Accord‌ 2008–2017 2.4L K24, 3.5L J35 Includes hybrid models
Honda CR-V‌ 2007–2016 2.4L K24, 1.5L L15 Turbo Use with synthetic oil only
Acura TL‌ 2009–2014 3.7L J37 Direct fit for Z9001 legacy
Acura RDX‌ 2013–2018 3.5L J35Y6 Turbocharged models excluded
Honda Odyssey‌ 2011–2020 3.5L J35 Verify O-ring compatibility

Cross-Reference‌:

OEM‌: Honda ‌15201-Z9011‌, Acura ‌15400-RTA-003‌
Aftermarket‌: FRAM ‌PH7317‌, Bosch ‌3323‌, WIX ‌WL10090‌
Oil Compatibility‌: 0W-20, 5W-20, 5W-30 synthetic or conventional.
Symptoms of a Failing Oil Filter‌
Low Oil Pressure Warning Light‌: Clogged filter media restricts flow.
Engine Knocking‌: Bypass valve failure allows unfiltered oil to circulate.
Oil Leaks‌: Cracked housing or damaged O-ring seal.
Dark Exhaust Smoke‌: Contaminants bypassing the filter burn in combustion.
Reduced Fuel Efficiency‌: Increased engine friction due to poor lubrication.
OEM vs. Aftermarket Comparison‌
Feature‌ ‌Honda 15201-Z9011‌ ‌Aftermarket (e.g., FRAM PH7317)‌
Filtration Efficiency‌ 98% at 25 microns 95% at 25 microns (varies by brand)
Anti-Drainback Valve‌ Silicone (durable) Nitrile rubber (prone to hardening)
Burst Pressure‌ 300 PSI 250–280 PSI
Price Range‌
8
–
8–15
5
–
5–12
Warranty‌ 1 year (Honda) Limited lifetime (brand-dependent)
Installation Guide‌
Tools Needed‌:
Oil filter wrench (64–65mm cap style), torque wrench (12–18 Nm), new O-ring/gasket.
Step-by-Step Instructions‌:
Drain Old Oil‌:
Warm up the engine, then drain oil via the pan plug.
Remove Old Filter‌:
Use a wrench to unscrew the ‌15201-Z9001/Z9011‌ counterclockwise.
Prepare New Filter‌:
Lubricate the O-ring with fresh oil and hand-tighten the ‌15201-Z9011‌.
Secure Filter‌:
Tighten an additional ¾ turn after contact (do not over-torque).
Refill Oil‌:
Use manufacturer-recommended oil grade and quantity.
Check for Leaks‌:
Run the engine for 5 minutes and inspect the filter seal.

Pro Tips‌:

Replace the O-ring every filter change to prevent leaks.
Reset the oil life monitor via the vehicle’s maintenance menu.
Where to Buy‌
OEM‌: Honda/Acura dealerships, HondaPartsNow, Bernardi Parts.
Aftermarket‌: Amazon, RockAuto, AutoZone (search by part number ‌15201-Z9011‌).
Red Flags‌:
Missing Honda/Acura branding or incorrect thread size.
Poor packaging (indicates counterfeit products).
Maintenance Tips‌
Replace the oil filter every ‌5k–7k miles‌ (or per OEM schedule).
Always use the correct oil viscosity for your engine.
Inspect the oil pan plug washer during changes.
Avoid generic filters for turbocharged or high-mileage engines.
FAQ‌

Q: Is 15201-Z9011 backward-compatible with older models?‌
A: Yes – It replaces ‌15201-Z9001‌ for all listed Honda/Acura vehicles.

Q: Can I reuse the old O-ring?‌
A: No – Always install a new O-ring to prevent leaks.

Q: Does the Z9011 fit non-Honda vehicles?‌
A: No – Designed exclusively for Honda/Acura applications.

Q: Will aftermarket filters void my warranty?‌
A: No – As long as they meet Honda’s specifications (SAE/USCAR-36).

Q: How to identify a counterfeit Z9011 filter?‌
A: Check for uneven seams, blurry logos, or lack of embossed part numbers.

Conclusion‌

The ‌15201-Z9011 oil filter‌ is Honda’s upgraded solution for engines previously using ‌15201-Z9001‌, offering superior filtration and durability for Accord, CR-V, Acura TL, and Odyssey models. Symptoms like ‌low oil pressure warnings‌, ‌leaks‌, or ‌engine noise‌ indicate immediate replacement. Choose OEM for guaranteed performance or trusted aftermarket brands like Bosch for budget-friendly maintenance. Regular oil changes with the correct filter ensure engine longevity and peak efficiency.

SEO Keywords‌: Honda 15201-Z9011 oil filter, Z9001 replacement, FRAM PH7317 vs OEM, Acura RDX oil filter, low oil pressure fix

This guide targets Honda/Acura owners and DIYers, providing detailed compatibility tables, torque specs, and maintenance best practices. FAQs address warranty and counterfeit concerns, while SEO keywords integrate part numbers, models, and common failure symptoms. Highlighting backward compatibility ensures clarity for users transitioning from Z9001 to Z9011.