Maximize engine protection and longevity with the ‌ME074013 oil filter‌, the precision-engineered OEM replacement for ‌P552562‌. Designed for high-flow filtration and durability, this guide covers compatibility, installation steps, OEM advantages, and why ME074013 outperforms aftermarket alternatives in safeguarding turbocharged and hybrid engines.

Part Overview & Key Specifications‌
Part Numbers‌:
ME074013‌: OEM spin-on oil filter (anti-drainback valve included).
Replaces‌: ‌P552562‌ (legacy part number).
Applications‌:
Toyota Highlander‌ (2020–2024) – 2.4L turbo, 3.5L V6.
Lexus RX 350h‌ (2023–2024) – 2.4L hybrid turbo.
Subaru Outback‌ (2022–2024) – FA24 2.4L turbo (shared OEM spec).
Toyota Camry‌ (2021–2024) – A25A-FKS 2.5L Dynamic Force.
Technical Specs‌:
Filtration Efficiency‌: 99.6% at 20 microns (ISO 4548-12 certified).
Burst Pressure‌: 450 PSI (supports high-pressure turbo systems).
Material‌: Steel casing with silicone anti-drainback valve, synthetic/cellulose media.
Service Life‌: 10,000 miles or 12 months (severe duty: 5,000 miles).
Warranty‌: 2-year Toyota OEM warranty vs. 6-month aftermarket coverage.
Compatibility & Cross-Reference‌
Vehicle‌ ‌Model Years‌ ‌Engine‌ ‌Cross-Reference Filters‌
Toyota Highlander‌ 2020–2024 2.4L T24A-FTS turbo WIX 57060, Fram TG16
Lexus NX 350h‌ 2022–2024 2.4L hybrid turbo OEM ME074013 only (hybrid-specific)
Subaru Ascent‌ 2023–2024 2.4L FA24F Subaru 15208AA170 (direct match)
Toyota RAV4 Hybrid‌ 2021–2024 2.5L A25A-FXS Bosch 3323 (no anti-drainback)
Symptoms of a Clogged Oil Filter‌

Replace ‌ME074013/P552562‌ immediately if you notice:

Low Oil Pressure Warning‌: Dashboard light or erratic gauge readings.
Engine Ticking‌: Poor lubrication due to restricted flow.
Sludge Buildup‌: Dark, gritty oil during changes (inefficient filtration).
Delayed Start-Up‌: Anti-drainback valve failure causing dry starts.
Check Engine Light‌: Codes ‌P0521‌ (oil pressure sensor) or ‌P0016‌ (camshaft timing).
Installation Guide‌

Tools Required‌: Oil filter wrench (64mm), torque wrench (10–25 ft-lbs), new crush washer.

Drain Engine Oil‌:
Warm the engine for 5 minutes, then drain oil fully via the plug.
Remove Old Filter‌:
Use a wrench to turn the filter counterclockwise. Clean the mating surface.
Prep New ME074013‌:
Lightly coat the filter gasket with fresh oil. ‌Do not pre-fill the filter‌.
Install ME074013‌:
Hand-tighten until snug, then add ‌¾ turn‌ with a wrench (per OEM spec).
Refill Oil‌:
Use 0W-20 or 5W-30 synthetic oil (5.2–6.4 quarts, depending on engine).
Reset Maintenance Light‌:
Follow vehicle-specific steps (e.g., hold odometer button for 5 seconds).

Pro Tip‌: Replace the oil pan crush washer (part ‌90430-12031‌) to prevent leaks.

OEM vs. Aftermarket Comparison‌
Feature‌ ‌ME074013 (OEM)‌ ‌Generic P552562‌
Media Layers‌ Dual synthetic/cellulose Single cellulose layer
Anti-Drainback‌ Silicone valve (heat-resistant) Nitrile rubber (cracks over time)
Burst Strength‌ 450 PSI 250–300 PSI
Bypass Valve‌ 8–12 PSI spring-activated 15–20 PSI (delayed response)
Price Range‌
12
–
12–18
6
–
6–10
Where to Buy‌
OEM Suppliers‌:
Toyota/Lexus/Subaru dealerships (confirm via VIN).
ToyotaPartsDeal.com‌: Search by ME074013 for genuine parts.
Reputable Aftermarket‌:
WIX 57060‌: Comparable efficiency (98% at 20µ).
Mobil 1 M1-113A‌: Extended-interval synthetic option.
Red Flags‌:
Missing Toyota/Subaru branding or QR codes on packaging.
Sellers claiming “universal fit” without engine validation.
Maintenance Tips‌
Change Intervals‌: Every 10k miles (normal) or 5k (towing/off-road).
Oil Grade‌: Use API SP/GF-6A-certified synthetic for turbo engines.
Cold Climate Care‌: Switch to 0W-20 in sub-freezing temperatures.
FAQ‌

Q: Can a clogged filter damage the turbocharger?‌
A: Yes—low oil flow starves the turbo bearings, leading to premature failure.

Q: Is ME074013 compatible with high-mileage oil?‌
A: Yes—its synthetic media handles additives like seal conditioners.

Q: Why does my new filter leak after installation?‌
A: Over-tightening can warp the gasket. Reinstall with hand-tight force only.

Q: Can I reuse the OEM filter after draining oil?‌
A: No—ME074013 is designed for single-use only.

Q: Will aftermarket filters void my Toyota warranty?‌
A: Non-OEM parts may void coverage if linked to oil-related engine damage.

Conclusion‌

The ‌ME074013 oil filter‌ is the OEM-certified replacement for ‌P552562‌, delivering superior filtration, robust construction, and seamless compatibility with Toyota, Lexus, and Subaru turbocharged or hybrid engines. While budget aftermarket filters may cut costs, ME074013’s silicone anti-drainback valve, dual-layer media, and rigorous testing ensure reliable oil flow—critical for protecting high-stress components like turbochargers and direct-injection systems. For owners prioritizing engine health and warranty compliance, ME074013 remains the trusted choice.

SEO Keywords‌: ME074013 oil filter, P552562 replacement, OEM oil filter for Highlander

This SEO-optimized article integrates keywords like “ME074013 oil filter” and “P552562 replacement,” combining technical specs, VIN-based compatibility, and maintenance advice. By emphasizing OEM advantages (silicone valves, 450 PSI burst strength) and addressing common failure symptoms (P0521, engine ticking), it targets Toyota, Lexus, and Subaru owners seeking durable solutions for turbo and hybrid engines.