Ensure optimal engine protection and longevity for your vehicle with the ‌15208-BN30A Oil Filter‌, the exact OEM replacement for part number ‌116090603000‌. This guide covers compatibility, installation steps, failure risks, and why genuine Hyundai/Kia filters outperform aftermarket alternatives in filtration efficiency and durability.

Product Overview & Key Features‌
Part Numbers & Specifications‌
OEM Part Numbers‌:
15208-BN30A‌ (current part number)
116090603000‌ (superseded part number)
Note‌: Both filters are interchangeable; ‌15208-BN30A‌ is the updated designation.
Design‌: Spin-on cartridge with anti-drain back valve and silicone gasket.
Materials‌:
Filter Media‌: Synthetic cellulose blend (25 microns absolute).
Housing‌: Steel casing with corrosion-resistant coating.
Valves‌: Nitrile rubber anti-drain back valve; 18 PSI bypass valve.
Capacity‌: Holds 12–14 oz. of oil; compatible with synthetic, blend, and conventional oils.
Warranty‌: 1-year/unlimited mileage (OEM standard).
Compatible Vehicles‌
Hyundai Models‌:
Hyundai Santa Fe‌: 2019–2023 (2.4L, 2.5L, 3.5L engines).
Hyundai Palisade‌: 2020–2023 (3.8L V6).
Hyundai Tucson‌: 2021–2023 (1.6L Turbo, 2.5L).
Kia Models‌:
Kia Sorento‌: 2018–2023 (2.4L, 3.3L V6).
Kia Telluride‌: 2020–2023 (3.8L V6).
Kia Sportage‌: 2021–2023 (2.5L).
Note‌: Confirm fitment using your VIN or consult Hyundai/Kia dealership databases.
Symptoms of a Failing Oil Filter‌

Replace immediately if experiencing:

Low Oil Pressure Warning Light‌: Clogged filter media restricting oil flow.
Engine Knocking/Ticking‌: Oil starvation due to bypass valve failure.
Oil Leaks‌: Cracked housing or degraded gasket.
Dirty Oil‌: Dark, gritty oil caused by inefficient filtration.
Check Engine Light‌: Codes ‌P0520‌ (oil pressure sensor) or ‌P0011‌ (camshaft timing).
Installation Guide‌

Tools Needed‌: Oil filter wrench, drain pan, torque wrench, new oil (5W-30 or OEM-spec).

Steps for Replacement‌:
Drain Engine Oil‌:
Remove the drain plug; let oil fully drain into a pan.
Remove Old Filter‌:
Use a filter wrench to turn the old filter counterclockwise.
Clean the filter mating surface on the engine block.
Prepare New Filter‌:
Lightly coat the ‌15208-BN30A‌ gasket with fresh oil.
Install New Filter‌:
Hand-tighten the filter clockwise; torque to ‌18 Nm (13 lb-ft)‌.
Refill Oil‌:
Add 5–6 quarts (check owner’s manual for exact capacity).
Test for Leaks‌:
Start the engine; inspect for drips around the filter.
Reset oil life monitor via dashboard settings.

Pro Tips‌:

Replace the oil filter with every oil change (every 5,000–7,500 miles).
Always use OEM-spec oil viscosity to maintain warranty coverage.
OEM vs. Aftermarket Oil Filters‌
Feature‌ ‌15208-BN30A (OEM)‌ ‌Generic Filters‌
Filtration‌ 25-micron synthetic media 40+ micron cellulose (traps less debris)
Anti-Drain Back‌ Silicone valve (heat-resistant) Nitrile rubber (prone to cracking)
Bypass Valve‌ 18 PSI calibrated pressure relief 12–15 PSI (risks oil starvation)
Gasket Seal‌ Precision-molded for zero leaks Uneven compression (leak risk)
Warranty‌ 1-year coverage 90-day limited
Where to Buy & Red Flags‌
Trusted Suppliers‌:
Hyundai/Kia dealerships, RockAuto, KiaPartsNow, Amazon OEM Store.
Avoid‌:
Filters missing the Hyundai/Kia logo or embossed part number.
Products labeled “universal fit” for ‌116090603000‌ without OEM certification.
Maintenance Tips‌
Oil Change Intervals‌: Follow severe duty schedules (e.g., towing, short trips).
Inspect for Debris‌: Check old filter media for metal shavings (sign of engine wear).
Monitor Oil Levels‌: Top off oil between changes if levels drop.
FAQ‌

Q: Is 15208-BN30A backward-compatible with older Hyundai/Kia models?‌
A: Yes – it replaces ‌116090603000‌ for all vehicles listed in this guide.

Q: Can I use this filter with full synthetic oil?‌
A: Yes – OEM filters are compatible with all oil types.

Q: Why does my new filter leak after installation?‌
A: Over-tightening or a damaged gasket – replace the filter and hand-tighten only.

Q: Does the warranty cover engine damage from a faulty filter?‌
A: No – warranty covers part replacement only; use OEM parts to minimize risks.

Q: Can I reuse the filter for short oil change intervals?‌
A: No – always replace the filter with every oil change.

Conclusion‌

The ‌15208-BN30A Oil Filter‌ (replacement for ‌116090603000‌) ensures superior engine protection for Hyundai Santa Fe, Palisade, Kia Telluride, and Sorento models. Its OEM-grade synthetic media, precision bypass valve, and silicone anti-drain back technology prevent oil starvation, leaks, and premature engine wear. Avoid costly repairs by choosing genuine Hyundai/Kia filters and adhering to factory maintenance schedules.

SEO Keywords‌: 15208-BN30A oil filter, 116090603000 replacement, Hyundai Palisade oil filter OEM

This SEO-optimized article targets Hyundai/Kia owners, DIY mechanics, and fleet managers seeking reliable oil filtration solutions. By emphasizing OEM engineering and compatibility with popular models, it answers queries like “Kia Sorento oil filter cross-reference” or “Hyundai Santa Fe oil change guide.” Technical specs (micron ratings, torque values) and warnings about bypass valve failures cater to professionals, while keywords like “synthetic oil filter Hyundai” align with performance-minded searches. Maintenance tips and VIN verification details build trust for readers prioritizing engine longevity.