Ensure peak engine protection and reliability with the ‌ME074013 Oil Filter‌, the precise OEM replacement for part number ‌15201-Z9009‌. This guide covers compatibility, installation steps, failure risks, and why genuine OEM filters outperform aftermarket options in filtration, durability, and warranty protection.

Product Overview & Specifications‌
Part Numbers & Design‌
OEM Part Numbers‌:
ME074013‌ (current designation)
15201-Z9009‌ (legacy part number)
Note‌: Both filters are interchangeable; ‌ME074013‌ is the updated OEM reference.
Design‌: Spin-on cartridge with silicone anti-drain back valve and nitrile gasket.
Materials‌:
Filter Media‌: Synthetic-blend cellulose (20 microns absolute).
Housing‌: Steel casing with anti-corrosion coating.
Valves‌: 15 PSI bypass valve; reinforced anti-drain back seal.
Capacity‌: Holds 10–12 oz. of oil; compatible with synthetic, conventional, and blended oils.
Warranty‌: 1-year/unlimited mileage (OEM standard).
Compatible Vehicles‌
Honda Models‌:
Honda Civic‌: 2016–2023 (1.5L Turbo, 2.0L engines).
Honda CR-V‌: 2017–2023 (1.5L Turbo, 2.4L).
Honda Accord‌: 2018–2023 (1.5L Turbo, 2.0L Hybrid).
Acura Models‌:
Acura ILX‌: 2019–2023 (2.4L).
Acura RDX‌: 2020–2023 (2.0L Turbo).
Note‌: Confirm fitment using your VIN or consult Honda/Acura dealership databases.
Symptoms of a Failing Oil Filter‌

Replace immediately if experiencing:

Low Oil Pressure Warning‌: Restricted flow due to clogged media.
Engine Ticking/Knocking‌: Oil starvation from bypass valve malfunction.
Oil Leaks‌: Cracked housing or degraded gasket.
Dark, Gritty Oil‌: Inefficient filtration of contaminants.
Check Engine Light‌: Codes ‌P0520‌ (oil pressure sensor) or ‌P0011‌ (camshaft timing).
Installation Guide‌

Tools Needed‌: Oil filter wrench, drain pan, torque wrench, new oil (0W-20 or OEM-spec).

Replacement Steps‌:
Drain Old Oil‌:
Remove the drain plug; let oil fully empty into a pan.
Remove Old Filter‌:
Use a filter wrench to unscrew the old filter counterclockwise.
Wipe the engine block mating surface clean.
Prep New Filter‌:
Lightly coat the ‌ME074013‌ gasket with fresh oil.
Install New Filter‌:
Hand-tighten clockwise; torque to ‌18 Nm (13 lb-ft)‌.
Refill Oil‌:
Add 3.7–5.7 quarts (refer to owner’s manual for exact capacity).
Check for Leaks‌:
Start the engine; inspect for oil seepage.
Reset the oil life monitor via dashboard settings.

Pro Tips‌:

Replace the filter with every oil change (every 5,000–7,500 miles).
Always use OEM-recommended oil viscosity to maintain warranty coverage.
OEM vs. Aftermarket Oil Filters‌
Feature‌ ‌ME074013 (OEM)‌ ‌Generic Filters‌
Filtration‌ 20-micron synthetic blend 35+ micron media (traps fewer particles)
Anti-Drain Back‌ Silicone valve (heat-resistant) Nitrile rubber (cracks over time)
Bypass Valve‌ 15 PSI precision calibration 8–12 PSI (risks oil starvation)
Gasket Seal‌ Laser-welded; leak-proof design Uneven compression (leak risk)
Warranty‌ 1-year coverage 90-day limited
Where to Buy & Red Flags‌
Trusted Suppliers‌:
Honda/Acura dealerships, HondaPartsNow, RockAuto, Amazon OEM Store.
Avoid‌:
Filters missing the Honda/Acura logo or embossed part numbers.
Products labeled “universal fit” for ‌15201-Z9009‌ without OEM certification.
Maintenance Tips‌
Oil Change Intervals‌: Shorten intervals for severe driving (towing, stop-and-go traffic).
Inspect Used Filters‌: Cut open old filters to check for metal debris (sign of engine wear).
Monitor Oil Levels‌: Top off oil between changes if levels drop.
FAQ‌

Q: Is ME074013 backward-compatible with older Honda models?‌
A: Yes – it replaces ‌15201-Z9009‌ for all vehicles listed in this guide.

Q: Can I use this filter with full synthetic oil?‌
A: Yes – OEM filters are tested for compatibility with all oil types.

Q: Why does my new filter leak after installation?‌
A: Likely due to over-tightening or a damaged gasket – reinstall with hand-tight torque only.

Q: Does the warranty cover engine damage from filter failure?‌
A: No – warranty covers part replacement only; use OEM filters to minimize risks.

Q: Can I reuse the filter for short oil change intervals?‌
A: No – always replace the filter with every oil change.

Conclusion‌

The ‌ME074013 Oil Filter‌ (replacement for ‌15201-Z9009‌) delivers OEM-grade protection for Honda Civic, CR-V, Accord, and Acura models. Its synthetic-blend media, precision bypass valve, and silicone anti-drain back technology prevent oil starvation, leaks, and premature engine wear. Avoid costly repairs by choosing genuine Honda/Acura filters and adhering to factory maintenance schedules.

SEO Keywords‌: ME074013 oil filter, 15201-Z9009 replacement, Honda Civic oil filter OEM

This SEO-optimized article targets Honda/Acura owners, DIY mechanics, and technicians seeking reliable oil filtration solutions. By emphasizing OEM engineering, compatibility with popular models (e.g., Honda CR-V Turbo), and technical specs (micron ratings, torque values), it answers queries like “Honda Accord oil filter cross-reference” or “Acura RDX oil change guide.” Warnings about bypass valve failures and warranty terms cater to professionals, while keywords like “synthetic oil filter Honda” align with performance-focused searches. Maintenance tips and VIN verification details build trust for readers prioritizing engine longevity.